Milltronics PL-551 Informazioni Techniche Scaricare il pdf (Pagina 178)

100

101

SECTION THREE - CONVERSATIONAL INPUT SCREENS

The screen pictured above is the single position hole drill screen. One hole will be drilled or

tapped at (1,2). If a dimension is entered in the Z field on this screen it will drill the new depth at

(1,2) and subsequent holes. If the only dimension entered appears in the Z field, the Z axis will

move to that position; no hole will be drilled, and the Z depth will remain unchanged. This can

be useful for clearing clamps or fixtures.

The screen pictured above is the position drill screen using the grid holes option. It will drill a 6

x 5 grid of holes with 1" spacing in the X axis and .75" spacing in the Y axis. The first hole is at

(1,2). Below is a picture of the hole pattern created by this event.

164

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 440 441

Commenti su questo manuale

Nessun commento

Milltronics PL-551 Informazioni Techniche Pagina 178

Commenti su questo manuale

Prodotti e manuali riguardandi no Milltronics PL-551